ace-716 rugged ac/dc input 150w power supply input table : output table (at 50 o c) : inrush current (ace-716a/716ap) : not exceed 15a@115v ac or 30a@230v ac ripple and noise : less than 100mv line regulation : the line regulation for each outputs are less than C1%, while measuring at rated loading and C10% of input voltage changing load regulation : ace-716a/716ap : less than C3%@C5v and -12v, C6%@+12v ace-716t/c : less than C1%@C5v and -12v, C4%@+12v efficiency : ace-716a/716ap : higher than 75% ace-716t/c : higher than 70% hold-up time (ace-716a/716ap) : 20ms (typical)@115v ac altitude : 0 ~ 10,000ft protection : over voltage protection. the trip point is around 5.9v ~ 7.0v output thermal protection : built in 110C5 o c thermal switch in hs1 vibration : 10 ~ 55hz at 2g 3min. period, 30 min. along x, y and z axis impact : 10g for 20ms once on each x, y and z axis ACE-716AP rugged ac input 150w pfc power supply ace-716a rugged ac input 150w power supply ace-716t rugged 48v dc input 150w power supply ace-716c rugged 24v dc input 150w power supply hi-pot isolation : 4300v dc, input to output for one minute 2200v dc, input to ground for one minute mtbf : ace-716a : 188,800 hours ace-716t : 212,050 hours ace-716c : 187,490 hours safety : meets ul 478, 1012, 1950; csa 22.2 no. 234, vde en 60950 emi : meets fcc docket 20780 curve "a", en50081-2 : cispr22 "a" harmonic en 61000-3-2 for ACE-716AP ems standard (designed to meet the following limits) : en 50082-2 iec 801-1 8kv (air discharge) criteria b (ace-716a/716ap) iec 801-3, 10v/m criteria a iec 801-4, 2kv criteria b (ace-716a/716ap) iec 801-5, 2kv criteria b (ace-716a/716ap) built-in cooling fan operating temperature : -20 o ~ 70 o c (derating curve will occur 50 o ~ 70 o c) storage temperature : -20 o ~ 85 o c dimensions : 97(w) x 40.5(h) x 198(d)mm; (3.8" x 1.6" x 7.8") t v rheinland bauart gepr ft model input range input current ace-716a/716ap ace-716t ace-716c 85~135v ac or 180~265v ac, 47~440hz -36 ~ -72v dc +19 ~ +30v dc 4a@115v ac or 2a@230v ac 6a@-48v dc 12a@+24v dc ace-716a/716ap ace-716t ace-716c +5v 18a 18a 18a +12v 4a 4a 4a -5v 0.5a 0.5a 0.5a -12v 1a 1a 1a model rated load max. output +5v 25a 25a 25a +12v 10a 10a 10a -5v 1a 1a 1a -12v 1a 1.5a 1.5a pfc ordering information specifications dimensions 8-13 www.locamation.com auke vleerstraat 26 7521 pg enschede the netherlands phone +31 (0)53 480 33 66 fax +31 (0)53 435 32 91 email sales@loca mation.nl
|